How do I assign a fixed object (FOB) to a Patient Profile?

Complete the following steps to assign an FOB to a Patient Profile.

  1. Go to the desired Patient’s Profile and select the General page.

  2. On the General page, click the Edit button.

  3. Select the Enable FOB Confirmation check box.

  4. The FOB Device ID and FOB Seal ID fields become available. Complete these fields with the provided numbers on the devices. The FOB Location field is selected with the Primary Address, by default. If the address is different, select the applicable FOB Location.

  5. Click the Save button to complete the FOB assignment to the patient.

The FOB Device ID is unique (assigned) to a patient. If the ID is entered for more than one patient, then the system issues an error message, not allowing the information to be saved.